The idea for this work and this blog post came from Youtuber Skyentific. So hat-tip to him, and do take a look at his channel. Ravigneaux epicyclic gears are a compact way to make a gearbox with a large
3D Printing Clearance and Fit
It’s often the case that you need to 3D-print objects that must slot together, like the grey and red parts slotting into the white central hub in the picture above. (It’s a design for a 3D-printed BLDC motor that we’re
A slow-write fast-read optical artificial neural network – Part 2
Part 1 of this sequence of blog posts is here. This post assumes that you have read that one first. Summary (TL;DR) We made a photochromic neuron, but it suffered from a problem: the photochromic material was not fully reversible,
A slow-write fast-read optical artificial neural network – Part 1
Summary (TL;DR) This describes a working design for an optical neural-net synapse that will use photons to transmit a weighted signal to a summing optoelectronic artificial neuron. We also have a design for the neuron itself, which we will build
Prusa SL1
RepRap is the technology on which Josef Průša built his company, Prusa Research. A while ago, in recognition of this, he very kindly gave Adrian a Prusa SL1 – one of his open-source stereolithography machines – and we have been
RepRap Solenoid Bed Heater
RepRap (and other) FFF 3D printers have had heated beds to ensure prints don’t peel off for a long time. I think they were invented by Chris Palmer (Nophead) in 2010. They have also had magnetic beds to hold
Open-source Oxygen Concentrator
[NOTE: This is still in development, and it is NOT YET WORKING. Since this blog post was written we have done more work on this idea, and so the diagram above and the post are now out-of-date. For
RepRap Assembly Robot to Build Itself and More RepRaps
This assembly robot was made by Benjamin Jenett and Neil Gershenfeld at MIT. As you can see, it crawls over the structure it is building placing identical standard cubic blocks wherever it wishes. It is capable of building large-scale structures; structures
The Electric 3D Printer – First Attempt To Print A Controlled Shape
We now have a Github repository for all the work on this project here. See that link for the entire project log. If we want to print a shape, one of the things it would be useful to know is the
Duet 2 Maestro is the new controller for RepRap Fisher
We have updated our RepRap Fisher 3D Printer to use the new Duet 2 Maestro electronics, as well as implementing a number of other updates and design improvements. All our kits shipped from September 2019 will all have the Duet Maestro included.